 |
|
 |
 |
 |
 |
 |
 |
|
DIGITAL
MULTITRACK
RECORDING |
 |
|
MIDI
COMMUNICATION
|
_r03_c05.gif){kind=small} |
 |
_r04_c05.gif){kind=small} |
|
 |
 |
 |
||
 |
 |
 |
 |
|
|
||||
| Main Features | ||||
| INPUTS | VM7100: - 10 A/D Inputs - Digital In - Console In - 24 R-BUS Inputs (through VM-24E optional expansion board) VM7200: - 20 A/D Inputs - Digital In - Console In - 24 R-BUS Inputs (through VM-24E optional expansion board) N.B.: Depending on the configuration, up to 94 channels can be available (both analog and digital, connecting two VM-7200 units in digital cascade). |
|||
| OUTPUTS | -
24 R-BUS independent outputs (through VM-24E optional board) to which
can be assigned channels or FlexBus - 12 FlexBus Out (that can be both Aux or Bus) assignable to 8 + 6 dedicated FlexBus analog outputs and to 24 R-BUS outputs - 8 Assignable Out - Main, Rec, Monitor outputs |
|||
| DIGITAL PORTS AND EXPANSION SLOTS | -
AES/EBU and Coaxial selectable Inputs (Digital In) - AES/EBU and Coaxial outputs - Three I/O R-BUS ports (through VM-24E optional board) with external 8 in/8 out optional analog interface, AES/EBU, ADAT Optical + Tascam T-DIF - Wordclock In/Out |
|||
| SCENE MEMORIES | 100 (through Smart Media Card) | |||
| SAMPLE RATES | 44.1/48/32 kHz | |||
| A/D CONVERTERS | 24-bit, 64x oversampling | |||
| INTERNAL PROCESSING | 32-bit | |||
| D/A CONVERTERS | 24-bit 128x oversampling | |||
| DITHERING | From 16 to 24 bit in 1 bit steps (Multi Out outputs) | |||
| SIGNAL DELAY | n.d. | |||
| FADER RESOLUTION | 128
steps N. B.: A 32.768 steps range is available for the channel levels internal processing to provide a better response |
|||
| THD | 0.05% or less (@1 kHz, nominal level) | |||
| FREQUENCY RESPONSE | 10Hz - 20 kHz +/-0.1 dB (@44.1/48 kHz sampling rate) | |||
| HUM
AND NOISE (IHF-A, TYPICAL) |
-84 dBu or less for all outputs | |||
| INPUT LEVEL | From -60 to +4 dBu (+4 dBu nominal) | |||
| CROSSTALK | n.d. | |||
| Input and Multi In Channels | ||||
| INPUT DETAILS | -
VM-7100: Input 1-10 (balanced analog, XLR + TRS jack) - VM-7200: Input 1-20 (balanced analog, XLR + TRS jack) - Digital In (AES/EBU or Coaxial) - Console In (for Talkback or stereo signals) - Multi In 1-24 (analog and/or digital, through VM-24E optional board equipped with 3 R-BUS ports each one providing 8 in/out channels) Note: the VM-7200 and the VM-7100 Mixing Processors are different only for the numer of analog on-board inputs. Up to 24 analog or digital channels can be selected through the Multi In button available on both VM Mixing Processors, installing an optional VM-24E board connected to one o more 8 channels ADA-7000 interface units. |
|||
| PHANTOM POWER | Analog XLR Inputs are provided with Phantom power that can be switched on from the VM Mixing Console. | |||
| INSERT | -
VM-7100: insertion TRS jacks are provided on analog Inputs 1-6 (pre
A/D converter) - VM-7200: insertion TRS jacks are provided on analog Inputs 1-6 and 11-16 (pre A/D converter) Note: insertion effects are available for all channels in digital domain (using the internal Effect processors). |
|||
| GAIN | Input: from -60 to + 4 dB (adjustable from the VM Mixing Console) | |||
| I/O
OPTIONS (R-BUS 1-24) |
- Analog (Roland ADA-7000 optional interface box) - ADAT Optical + Tascam T-DIF (Roland DIF-AT optional interface box) - AES/EBU (Roland AE-7000 optional interface box) |
|||
| A/D CONVERTERS | 24-bit / 64x oversampling | |||
| EQ | -
2-band Lo and Hi, shelving with settable frequency - 1 Mid parametric band with Q setting between 16 and 0.36 - 1 multifunction band, Parametric/Notch/Lo-pass/Band-pass/Hi-pass with resonators - 1 Hi-pass filter with settable frequency - Gain: +/- 15 dB Note: when the channel Dynamic processor is on, the EQ multifunction band is not available. |
|||
| DYNAMIC PROCESSORS | Basic
algorithms: Compressor, Expander, Gate, Limiter Note: when the channel Dynamic processor is on, Feedback Delay and EQ multifunction band are not available. |
|||
| DELAY | -
Phase Delay: up to 14400 samples (300 ms @ 48kHz) - Feedback Delay: up to 14400 samples (300 ms @ 48kHz) Note: the sum of the Phase Delay and Feedback Delay values should not exceed a total of 14400 samples. When the channel Dynamic processor is on, Feedback Delay is not available. |
|||
| PHASE | Normal / Reverse | |||
| LEVEL CONTROLS | 24
100 mm. motorized faders Note: the Input and Multi In buttons of the VM Mixing Console allow to alternatively assign moving faders 1-24 to the related 24 Input and 24 Multi In (track returns) channel levels. Faders can also control FlexBus Master, Fader Group Master and Multi Out levels. |
|||
| PAN | 127 values (Range: L63 - R63) | |||
| ROUTING | -
Main Out / Rec Out - Cue Out (assignable to Multi Out ports) - FlexBus 1-12 (assignable to FlexBus Out and Multi Out ports) - Multi Out (analog and/or digital, through R-BUS and VM-24E optional board and built-in Assignable Out analog ports) |
|||
| SOLO MODE | On /Off, selectable: Pre-EQ/PFL/AFL/In-Place | |||
| METERING | -
LCD display with selectable Pre-EQ/Pre-Fader/Post-Fader monitoring - Selectable Over Range and Peak Hold - Otional LED Meter Bridge |
|||
| Main / Rec / FlexBus 1-12 / Multi / Assignable / Monitor Outputs | ||||
| OUTPUT DETAILS | -
Main Out (balanced, XLR and TSR jack) - Rec Out (unbalanced, RCA jack) - VM-7200 only: FlexBus 5-12 (balanced, TRS jack); FlexBus 7-12 (balanced, XLR) - Multi Out 1-24 (analog and/or digital, through R-BUS and VM-24E optional board equipped with 3 R-BUS ports each one providing 8 in/out channels) - Assignable Out 1-8 (balanced, TSR jack; Outputs 1-4 can also be used as Studio Monitor independent pairs) - Monitor Out (balanced, TRS jack) Note: the VM-7100 Mixing Processors is not equipped with analog FlexBus outputs. Anyway, FlexBusses can be routed to the 24 Multi Out R-BUS, available if an optional VM-24E board has been installed. Multi Outs 17-24 correspond to Assignable Outs 1-8. |
|||
| DYNAMIC PROCESSORS | -
Available on Main Out and Rec Out. - Basic algorithms: Speaker Modeling (using Roland DS-90A powered monitors), 10-band parametric EQ, 3-band dynamic. Note: FlexBus dynamic processors insert is available in digital domain (using the internal effects). |
|||
| LEVEL CONTROLS | -
Main Out: 100 mm. motorized fader - FlexBus Master 1-12: 100 mm. motorized fader Note: the FlexBus Master button of the VM Mixing Console allows to control FlexBus Masters 1-12 by using faders 1-12. |
|||
| D/A CONVERTERS | 24-bit (128x oversampling) | |||
| I/O
OPTIONS (R-BUS 1-24) |
-
Analog (ADA-7000 optional Roland interface) - ADAT Optical + Tascam T-DIF (DIF-AT optional Roland interface) - AES/EBU (AE-7000 optional Roland interface) |
|||
| METERING | -
Main Out, Monitor Out, FlexBus Out: displayed on LCD - LED optional Meter Bridge |
|||
| Other | ||||
| DISPLAY | Backlit LCD with adjustable contrast | |||
| USER INTERFACE | Cursor and Page buttons, Assignable Knobs and Multifunction Switches | |||
| GROUPS | -
24 Fader groups - 9 Mute groups |
|||
| PAIR | Channel Link function for adjacent odd/even channels | |||
| PAN TYPE | Normal / Gang | |||
| SOLO MODE | Selectable (Pre-EQ/PFL/AFL/In-Place) | |||
| DYNAMIC PROCESSORS | Available Note: besides the pre-assigned dynamic processors, the channels can use the internal effect processors as insert full multiband dynamic algorhitms. |
|||
| AUX SEND | Up to 12 FlexBuses can be used as Aux Send or Bus | |||
| FX PROCESSORS | 2
Stereo + built-in Master FX Note: up to 3 optional VS8F-2 expansion boards can be installed in both the VM-7100 or the VM-7200 Mixing Processors, each one featuring 2 stereo effect processors to provide up to 8 stereo effects + Master FX. Due to the high flexibility of the system, a pair of VM Mixing Processors (each one equipped with 3 VS8F-2 boards) can provide a total of 16 effects. |
|||
| LIBRARIES |
- EQ |
|||
| AUTOMIX | -
Absolute and relative recording modes - Punch-in - Copy/move/erase/cut/gradation/expand functions - MTC sync |
|||
| SURROUND | -
2+2, 3+1, 3+2+1 modes - Settings can be edited through a graphic interface |
|||
| SYNCHRONIZATION AND COMMUNICATION | -
Wordclock In/Out - MIDI In/Out/Thru - Cascade In/Out (installing an internal VM-24C optional board) - VM-Link I/O (to connect the VM Mixing Console) |
|||
| REMOTE CONTROL | -
MMC, with built-in Transport, Location and Jog/Shuttle controls - Remote control through external MIDI units |
|||
| OTHER FUNCTIONS AND ACCESSORIES | -
Oscillator - Talkback - Built-in Spectrum Analyzer - Optional Meter Bridge - Virtual Patchbay functions - EZ Routing - COSM Technology (speaker modeling, mic simulator, guitar amp simulator) - Smart Media Card Slot |
|||